The Chinese company Zhaoxin, along with server processors of the Kaisheng KH-40000 series, introduced a consumer quad-core x86-compatible 64-bit Kaixian KX-6000G processor for laptops, all-in-one PCs, embedded systems and terminals. The manufacturer indicates that the chip is produced using a 16-nm manufacturing process.
The Kaixian KX-6000G will be available in two configurations. One operates in the frequency range from 2.0 to 3.0 GHz and has a claimed power consumption of 15 watts. For the second version, a dynamic TDP of 25-35 W is declared, as well as a frequency range from 2.6 GHz (3.0 GHz at TDP 35 W) to 3.3 GHz. For both versions of the processor, support for SSE 4.2 and AVX instructions is declared.
The Kaixian KX-6000G memory controller supports up to 64GB of dual-channel DDR4-3200 RAM. It also indicates support for 16 PCIe 3.0 lanes, four USB 3.2 Gen1 connectors, two USB 2.0, and two SATA III ports. Kaixian KX-6000G is equipped with an integrated graphics core C-1080. It supports DirectX 12, OpenCL 1.2, OpenGL 4.6, 4K displays.
Zhaoxin notes that compared with the previous generation products, the performance of the Kaixian KX-6000G graphics subsystem has been increased by four times, and the processor’s energy efficiency index has increased by 60%. In addition, the chip’s idle power consumption is reduced by 50%.
Together with the Kaixian KX-6000G, the manufacturer announced one of the first products based on it – the Boyue G43 laptop from Haier. The laptop received a 14-inch display with support for a resolution of 1920 × 1200 pixels and an aspect ratio of 16:10. The device is based on a 35-watt version of the Kaixian KX-6000G quad-core processor with a base frequency of 3.0 GHz and a maximum of 3.3 GHz. For the novelty, 8 GB of DDR4 RAM and a 512 GB NVMe solid-state drive are announced. The laptop is equipped with one USB 3.1 connector, two USB 2.0, two USB 3.1 Gen1 (Type-C) and one HDMI output. In addition, support for wireless standards Wi-Fi 6 and Bluetooth 5.0 is indicated.
If you notice an error, select it with the mouse and press CTRL + ENTER.