Kingroon has announced a promotion for the Kingroon KP3S Pro console-type 3D printer with a direct drive extruder (print head). As part of the promotion, which will last until January 31, the 3D printer can be purchased at a significant discount.
Image Source: Kingroon
Kingroon KP3S Pro 3D printer is equipped with X and Z linear guides to improve the stability and precision of the print head, which can improve print quality. The device uses a direct drive titanium extruder with a gear ratio of 3:1.
The maximum heating temperature of the extruder is 260 ° C, which allows printing using various materials, including polylactide (PLA, PLA), elastic materials such as thermoplastic polyurethane (TPU) and PETG (a modified version of polyethylene glycol terephthalate – PET), as well as abrasive and durable threads such as ABS and nylon. The thread diameter is 1.75 mm. The heating temperature of the printing table reaches 110 °C.
Kingroon KP3S Pro has an enlarged construction area compared to the Kingroon KP3S model, the dimensions of which are 200×200×200 mm. The dimensions of the printed table are 210×210 mm.
Thanks to the TMC2225 stepper motor driver, designed to control the 3D printer motors and reduce noise, the device operates very quietly, without causing disturbance to others. The built-in switching power supply KP3S Pro is characterized by increased safety in service.
The KP3S Pro has an auto-resume function in case of power failure or filament breakage. The 3D printer has a USB port for connecting to a computer. There is also a slot for microSD memory cards. KP3S Pro is compatible with Windows/Mac/Linux computers.
The printing process is controlled using the Cura slicer software. The print speed is up to 100 mm/s, the recommended print speed is between 20 and 60 mm/s.
Kingroon KP3S Pro comes pre-assembled by 95%, so the user only needs 15 minutes to install it.
The cost of Kingroon KP3S Pro as part of the promotion with the promotional code KINGROONRU01 will be $189.
If you notice an error, select it with the mouse and press CTRL + ENTER.
